Home Parts
Engine Exhaust Wheels Brakes Electrical Handlebars Body Air & Fuel Apparel
Bikes About Contact Reviews Blog CART SHOP NOW →
Maintenance

Motorcycle Pre-Ride Checklist: 5 Minutes That Keep You Safe

Tires, controls, lights, oil, chassis and stand: a five-minute walk-around that catches problems before they become dangerous.

Rider performing a motorcycle pre-ride checklist on a Harley

A motorcycle pre-ride checklist takes about five minutes and is one of the simplest ways to ride more safely. Many breakdowns and crashes start with a problem that was visible before the bike left the driveway, such as a soft tire, a loose cable or a light that is not working.

Motorcycle safety instructors often teach the T-CLOCS method. It is easy to remember and covers everything that matters.

T: Tires and wheels

  • Check pressure with a gauge when tires are cold. Do not trust a visual check.
  • Look for cuts, bulges, embedded objects and cracking.
  • Check tread depth and wear indicators.
  • Inspect wheels for damage, and spoke wheels for loose or broken spokes.

Learn more in our Harley tires buying guide.

C: Controls

  • The throttle should move freely and snap closed at every handlebar position.
  • The clutch and brake levers should operate smoothly with the right free play.
  • Check cables for fraying and kinks, and hydraulic lines for leaks.
  • Make sure mirrors are tight and properly adjusted.

L: Lights and electrics

  • Headlight on low and high beam
  • Tail light and brake light, tested with both front lever and rear pedal
  • Turn signals front and rear
  • Horn
  • Battery health, especially if the bike has been sitting

O: Oil and other fluids

  • Check the engine oil level the way your manual specifies.
  • Check the brake fluid level and color in the reservoirs.
  • Look under the bike for fresh drips of oil, fuel or brake fluid.
  • Check coolant on liquid-cooled models.
  • Make sure you have enough fuel for the trip.

C: Chassis

  • Bounce the front and rear suspension and check for smooth movement and leaks.
  • Check drive belt or chain condition and tension.
  • Make sure luggage, saddlebags and accessories are securely fastened.
  • Look for loose bolts, especially on anything you recently fitted.

S: Stands

  • The side stand should spring up fully and hold its position.
  • Check that the springs are not stretched or broken.
  • On bikes with a center stand, check that it also retracts securely.

Make it a habit

You do not need to do every check in detail before every short ride, but tire pressure, lights and a quick look underneath take seconds. Do the full walk-around before long trips, after the bike has been stored and after any service work. Pair your quick checks with a full service using our Harley-Davidson maintenance checklist.

Found a problem?

Do not ride on a hope. Fix it first, or have it checked by a qualified mechanic. A blown bulb or worn brake pad is an easy repair at home and a serious risk on the road.

Find replacement bulbs, pads, cables and service parts in our Harley-Davidson parts catalogue, or contact our team for help.